3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320, Yellow, 18 in x 25 yd, 20 mil, 1 Roll/Case
- 3M ID 7000042751
- UPC 00051125748155
Details
Highlights
- Yellow flexo plate mounting tape with air release feature adhesive
- This 0.020 inch (0.51 mm) yellow, double coated foam tape has the air release feature with easy plate side removal
- Provides high quality medium-soft combination print. The adhesives remove cleanly from the print plate and the print cylinder or sleeve
- Flexographic Printing, Flexographic Printers
- Cushioned flexographic plate mounting sticky back tape
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner
- Plate easily demounts from the double coated cushioned tape without adhesive residue
- Tape also removes cleanly from the sleeve or steel print cylinder
- Flexographic printing, flexographic printers
- Cushioned flexographic plate mounting sticky back foam tape
This 0.020 inch (0.51 mm) yellow, double coated foam tape has the air release feature with easy plate side removal.
Bubble Free Flexographic Plate Mounting
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320 is a yellow foam tape that provides high quality combination print. This is the medium soft tape for combination print. It has the air release feature that allows for bubble free mounting. This flexographic plate mounting tape has excellent resistance to lifting on press allowing for easy and clean plate removal.
Recommended Applications
Mounting photopolymer plates to flexographic printing cylinders and sleeves
Used in combination, process and solid printing processes
3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry
3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs.
This is manufactured for 20 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting.
On Easy with Reduced Air Entrapment
3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique microchannels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.
Keep the Presses Running and your Customers Coming Back
For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done.
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320 is a yellow foam tape that provides high quality combination print. This is the medium soft tape for combination print. It has the air release feature that allows for bubble free mounting. This flexographic plate mounting tape has excellent resistance to lifting on press allowing for easy and clean plate removal.
Recommended Applications
Mounting photopolymer plates to flexographic printing cylinders and sleeves
Used in combination, process and solid printing processes
3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry
3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs.
This is manufactured for 20 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting.
On Easy with Reduced Air Entrapment
3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique microchannels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.
Keep the Presses Running and your Customers Coming Back
For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done.
Typical Properties
| Adhesive Type | Differential Acrylate |
| Air Release | Yes |
| Application Thickness (Metric) | 0.5 mm |
| Backing Material | Polyethylene Foam |
| Backing Thickness (metric) | 0.559 mm |
| Brands | Cushion-Mount™ |
| Composite Sleeves | Yes |
| Industries | |
| Primary Liner | Polycoated Polyester |
| Primary Liner Thickness (Metric) | 0.11 mm |
| Print Quality | Combination Printing - Medium Soft |
| Print Quality (Series) | 13 Series |
| Product Color | Yellow |
| Product Form | Roll |
| Total Tape Thickness without Liner (metric) | 0.56 mm |
| Units per Case | 1.0 |
| Urethane Sleeves | Yes |
| Warranty Period | 2 Years from Date of Manufacture |
| Overall Length (Metric) | 22.86 Meter |
| Overall Width (Metric) | 457 mm |
