1. Indonesia
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Cold Shrink Splices
  6. 3M™ Cold Shrink QS-III Splice Kits 5775A-MT, 15 kV, 2-4/0 AWG (35-95 mm2), 1/case

3M™ Cold Shrink QS-III Splice Kits 5775A-MT, 15 kV, 2-4/0 AWG (35-95 mm2), 1/case

  • 3M ID 7000031680

Splices shielded cables

Silicon rubber-splice body provides good high- or low-temperature performance and Armorcast™ jacket offers mechanical protection

Suitable for use with 10000 and 20000 Series connectors or other UL Listed inline compression connectors

View more details

Details

Highlights
  • Splices shielded cables
  • Silicon rubber-splice body provides good high- or low-temperature performance and Armorcast™ jacket offers mechanical protection
  • Suitable for use with 10000 and 20000 Series connectors or other UL Listed inline compression connectors
  • Solderless ground braid offers constant force spring connection
  • 0.64 to 1.01-in O.D. insulation
  • Accommodates wire size of 2 AWG to 250 kcmil
  • Rated for 5/8 to 15 kV applications
  • Includes 6 cold shrink adapter tubes and 3 splice bodies, 6 tubes of P55/R compound, gloves, 3 rolls of Armorcast™ structural material and more
  • IEEE Approved
  • 1 kit/case

3M™ 5775A-MT Series Resin QS-III Inline Trifurcating Cable Splice Kit is designed for splicing 5/8 to 15 kV-rated shielded power cables. The cold shrink design ensures a quick installation and cable size transitions. This armored or non-armored splice kit is perfect for use in cable trays, cable racks, junction boxes and cable hangers, as well as aerial and wet or dry locations.

3M™ 5775A-MT Series Cold Shrink Resin QS-III Inline Cable Splice Kit includes 3 metallic shield sleeves, 6 small and 2 large constant force springs, 2 cold shrink jacket tubes, 1 roll Scotch-Seal™ mastic tape 2229 and more. This cable splice kit uses constant force springs for connecting ground braid jumpers, splice bodies and tapes for moisture-seal applications. The splice body has a specially formulated silicone rubber construction to ensure optimal high- and low-temperature performance. This splice kit is suitable for use with solid dielectric cables such as XLP, XLPE, EPR and more. IEEE Approved.

Typical Properties